Plug and play fiber subscriber kit.

Features:
Establishes links up to 20 km
Supported speeds: 2.4 Gbps (uplink) / 1.2 Gbps (downlink)
(1) GPON WAN port with an SC/APC optical connector
(1) GbE RJ45 LAN port
Powered via 24V passive PoE
Note: This device is designed to be used with the UFiber OLT. Third-party OLTs may not be compatible or are unable to reliably connect to the ONU.

UF-Nano

GPON customer-premises equipment (CPE) with an LED display for convenient device monitoring.

UISP Fiber NanoG

UFiber NanoG

Default

Features:
<ul>
<li>Establishes links up to 20 km</li>
<li>Supported speeds: 2.4 Gbps (uplink) / 1.2 Gbps (downlink)</li>
<li>(1) GPON WAN port with an SC/APC optical connector</li>
<li>(1) GbE RJ45 LAN port</li>
<li>Powered via 5V USB* or 24V passive PoE</li>
</ul>
Note: This device is designed to be used with the UFiber OLT. Third-party OLTs may not be compatible or are unable to reliably connect to the ONU. ______Micro-USB power adapter included only in single-pack.*

UF-LOCO

Pack Type

Single Unit

5-Pack

20-Pack

GPON customer-premises equipment (CPE) that pairs high performance with extremely low power consumption.

Mechanical
Dimensions	77 x 77 x 28 mm (3.03 x 3.03 x 1.1")
Weight	110 g (3.88 oz)
Hardware
Networking Interfaces	(1) SC/APC, GPON WAN (1) RJ45, Ethernet LAN
Networking Interface Speeds	(1) GPON WAN, ITU G.984, 2.488 Gbps Downstream, 1.244 Gbps Upstream (1) GbE LAN, 10/100/1000 Mbps
Management Interface	In-Band Ethernet/PON
Normal Optical Power Range	TX (Class B+): 1.5 to 5 dBm RX: -8 to -28 dBm
Power Method	24V Passive PoE (Pins 4, 5+; 7, 8-) Dying Gasp Support
Power Supply	PoE Adapter: 24V, 0.3A
Max. Power Consumption	7W
Supported Voltage Range	20 to 28V
Processor Specs	MIPS-32, 240 MHz
Memory Information	128 MB DDR3
Buttons	(1) Display Information (1) Reset
Operating Temperature	-10 to 45° C (14 to 113° F)
Operating Humidity	5 to 95% Noncondensing
Certifications	CE, FCC, IC