XG 6 PoE (Gen1)
554,00 €
Sold Out
Flex 10 GbE
USW-Flex-XG
276,00 €
A compact, 5-port, Layer 2 switch that supports 10 GbE speeds and can be powered with PoE or a 5V USB-C adapter.

(4) 10 GbE ports

(1) GbE PoE+ input port for power

Installation Guide
Technical Specifications
Mechanical
Dimensions135 x 185 x 32 mm (5.3 x 7.3 x 1.3")
Weight1.2 kg (2.7 lb)
Enclosure materialPolycarbonate
Hardware
Management interfaceEthernet In-Band
Networking interface(1) GbE, PoE+ RJ45 port
(4) 10 GbE RJ45 ports
Total non-blocking throughput41 Gbps
Switching capacity82 Gbps
Forwarding rate61.012 Mpps
Power method(1) PoE+, 50—57V DC, 25W
(1) USB Type-C, 5V DC, 5A
Power supplyPoE+ (Pins 1, 2+/3, 6- or 4, 5+/7, 8-)
AC/DC power adapter, 5V DC, 5A, 1.5 m cord (Included)
Supported voltage range90—264V AC (Adapter)
Max. power consumption 25W
ESD/EMP protectionAir: ± 16kV, contact: ± 12kV
ButtonFactory reset
Ambient operating temperature-5 to 45° C (23 to 113° F)
Ambient operating humidity10 to 90% noncondensing
CertificationsCE, FCC, IC
Switching Features
Layer 2 featuresIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 features
LEDs
System Status
Ethernet Speed/link/activity
Application Requirements
UniFi Network Version 6.1.67 and later