Fiber XGS
137,00 €
An optical network unit that can deliver 10 Gbps uplink/downlink speeds over distances up to 20 km.

(1) XGS-PON port

(1) 10GbE RJ45 LAN port

Note. This device is only compatible with the Fiber XGS OLT. It cannot be used with third-party OLTs.

Installation Guide
Technical Specifications
Dimensions100 x 100 x 27 mm (3.9 x 3.9 x 1.1")
Weight220 g (0.49 lb)
Enclosure materialUV-stabilized polycarbonate
Networking interface(1) SC/APC, ITU-G.9807 XGSPON WAN port
(1) 100/1,000/2,500/5,000/10,000 MbE RJ45 LAN ports
Management interfaceEthernet in-band
Memory256 MB DDR
Onboard flash storage32 MB NOR
Max. power consumption8W
Power methodUSB-C 5V DC, 3A
Power supply5V DC, 3A power adapter
Supported voltage range5V DC power adapter
Total non-blocking line rateDownstream: 9.95 Gbit/s
Upstream: 9.95 Gbit/s
Normal TX range of optical module4 to 9dBm
Normal RX range of optical module-9 to -26dBm
Button(1) Factory reset
Ambient operating temperature-15 to 45° C (5 to 113° F)
Ambient operating humidity10 to 95% non-condensing
CertificationsCE, FCC, IC
Operating wavelengthTX: 1,270nm
RX: 1,577nm
Line codeScrambled NRZ
Physical reach20 km
PowerWhite: ON
EthernetSteady white: link up
Blinking white: activity
OFF: link down
PON status(3) signal LEDs
All-OFF: bootup
1x orange: signal too low (< -27 dbm)
1x white: signal low (>= -27 dbm)
2x white: signal good (>= -24 dbm)
3x white: signal strong (>= -12 dbm)
1x orange + 2x white: signal too strong (>= -9 dbm)
3x orange: no signal
LEDs alternate between orange + white + orange and a signal strength indicator: no authority
Management applicationUISP: Version 1.5.7 and later