Name: Surge Protection Connector SHD
Brand: Ubiquiti
SKU: UISP-Connector-SHD
Availability: InStock

Cost-effective solution for protecting outdoor Ethernet devices.

It is powered by 24V Passive PoE and provides up to 24W of power on three PoE out ports. The N-SW is designed for outdoor deployment and supports up to 4 Gbps total, non-blocking line rate.

N-SW

The NanoSwitch (N-SW) is an outdoor, 4-port Gigabit switch with PoE pass-through.

NanoSwitch

An outdoor, 4-port Gigabit switch with up to 4 Gbps total, non-blocking line rate support.

Default

Each is outfitted with a hook that connects directly to the UISP cable drain wire.
Features:
<ul>
<li>Integrated, one-meter grounding wire*</li>
<li>Protects Ethernet hardware from ESD damage</li>
<li>Easy to install without soldering</li>
<li>(20) connectors per pack</li>
</ul>
*Connect to a tower grounding system or metal mounting bracket.

UISP-Connector-GND

Shielded RJ45 connectors designed for UISP Ethernet cables (UISP Cable Pro and Cable Carrier).

Surge Protection Connector GND

Outfitted with a hook that connects directly to the UISP cable drain wire.

UISP-Connector-SHD

Surge Protection Connector SHD

Introducing the next generation Ethernet Surge Protector, model ETH-SP-G2, from Ubiquiti. The ETH-SP-G2 is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP-G2 to the installation provides an additional layer of protection to the network. The ETH-SP-G2 is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.

ETH-SP-G2

ESD Protection for Outdoor High-Speed Networks

Ethernet Surge Protector

ESD protection for outdoor high-speed networks.

Overcome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.

F-POE-G2

The FiberPoE™ connects remote PoE devices and provides data and power using fiber and DC cabling.

Optical Data Transport for Outdoor PoE Devices

Connects remote PoE devices and provides data and power using fiber and DC cabling.

UISP-Connector-SHD
Type	RJ45 Male connector with shielding
Pack type	100-pack