The Access Point nanoHD (UAP nanoHD) is a compact, dual-band access point that can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands. The UAP nanoHD can also support over 200 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. With its elegant, nano-sized design, this access point can be staged virtually anywhere indoors where you&#39;d like to enhance your wireless speed and performance. Built for plug-and-play simplicity, the UAP nanoHD can be set up in minutes and fully managed with the UniFi Network web application or UniFi mobile app.
Features:
<ul>
<li>Four-stream, 802.11ac Wave 2 WiFi technology</li>
<li>5 GHz (4x4 MU-MIMO) band with a 1.733 Gbps throughput rate</li>
<li>2.4 GHz (2x2 MIMO) band with a 300 Mbps throughput rate</li>
<li>200+ concurrent client capacity</li>
<li>Powered by PoE (PoE injector included with single pack)</li>
</ul>
Managed with the UniFi Network application.

Datasheet

Installation Guide

UAP-nanoHD

Size

Single Unit

3-Pack

5-Pack

Dual-band, 802.11ac Wave 2 access point that can support over 200 clients with its 2+ Gbps aggregate throughput rate.

Access Point nanoHD

nanoHD

The Access Point Lite Arm Mount (UACC Lite AP AM) allows you to mount an U6 Lite, nanoHD (UAP nanoHD), or AC Lite (UAP AC Lite) to the wall instead of the ceiling.

UACC-Lite-AP-AM

The Access Point Lite Arm Mount (UACC Lite AP AM) allows you to mount an U6 Lite, nanoHD (UAP nanoHD), or AC Lite (UAP AC Lite) to the wall instead of the ceiling.

Access Point Lite Arm Mount

Wall mount for an U6 Lite, nanoHD, or AC Lite.

AP Lite Arm Mount

Default

Use the UniFi nanoHD AP Recessed Ceiling Mount for an integrated ceiling deployment. Designed as a low‑profile mounting option, the Recessed Ceiling Mount sits discreetly within your ceiling to create a sleek look. Available in three-packs.

nanoHD-RCM-3

Recessed ceiling mount for access point nanoHD.

Access Point nanoHD Recessed Ceiling Mount

AP Lite Recessed Ceiling Mount

The Access Point nanoHD Covers allow you to personalize the exterior of a UAP nanoHD or U6 Lite so it blends seamlessly with your space&#39;s aesthetic and equipment.

Mechanical
Dimensions	Ø160 x 32.7 mm (Ø6.3 x 1.3")
Weight	Without mount: 300 g (10.6 oz) With mount: 315 g (11.1 oz)
Hardware
Networking interface	(1) GbE RJ45 port
Power method	PoE
Power supply	UniFi PoE Switch
Max. power consumption	10.5W
Supported voltage range	44—57V DC
Max. TX power 2.4 GHz 5 GHz	23 dBm 26 dBm
MIMO 2.4 GHz 5 GHz	2 x 2 4 x 4
Throughput rate 2.4 GHz 5 GHz	300 Mbps 1733 Mbps
Antenna gain 2.4 GHz 5 GHz	2.8 dBi 3 dBi
Button	(1) Factory reset
Mounting	Wall/ceiling (Included)
Operating temperature	-10 to 70° C (14 to 158° F)
Operating humidity	5 to 95% noncondensing
Certifications	CE, FCC, IC, cULus
Software
WiFi standards	802.11 a/b/g/n/ac/ac-wave2
Wireless security	WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID	Up to 8 per Radio
WMM	Voice, video, best effort, and background
Concurrent clients	200+
Supported Data Rates (Mbps)
802.11a	6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b	1, 2, 5.5, 11 Mbps
802.11g	6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n	6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
802.11ac	6.5 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2/3/4, VHT 20/40/80) 58 Mbps to 1.7 Gbps (MCS0 - MCS9 NSS1/2, VHT 160)