UniFi
UISP
AmpliFi
Gate Access Starter Kit
UA-SK-Gate
646,00 €
Available Jul 19
Control a vehicle gate using the connected Intercom and authorize gate access with License Plate Unlock when paired with a compatible Protect AI camera*.

(1) Gate Hub

(1) Intercom

(1) PoE++ adapter

(2) 2-wire PoE extenders

*Note. License Plate Recognition is supported on Protect AI Series cameras, excluding 360 lenses.

To subscribe to back in stock emails.
Installation Guide
Technical Specifications

UA-Hub-Gate
Mechanical
Dimensions175 x 126 x 26 mm (6.9 x 5 x 1")
Weight460 g (1 lb)
Enclosure materialPolycarbonate
MountingDin-rail (Included)
Hardware
Networking interface(5) 10/100/1000 Base-T
Power methodPoE++
Max. power consumptionWithout PoE output: 22W
With PoE output: 50W
PoE input50V DC, 1A
PoE outputPoE passthrough, (4) PoE, 50V DC, Max. 28W
Button(1) Factory-reset
Digital inputGate exit request, gate position, side door exit request, side door position, emergency
Dry output relay(2) Operator: rated 30V DC, up to 1A
(1) Aux: rated 30V DC, up to 1A
Powered output relaySide door lock: 12V DC, up to 1A
Operating environmentIndoor use only with device itself
Outdoor use with waterproof junction box
Ambient operating temperature-30 to 60° C (-22 to 104° F)
Ambient operating humidity5 to 90% noncondensing
CertificationsCE, FCC, IC
LEDs
PoE inSteady white: Pending adoption
Steady blue: Adopted, device is ready
Blinking white/blue: Upgrading firmware
PoE outOff: Not connected or no data link
Steady white: Connected and data link on
Input terminalsOff: No wire
Steady white: Wire connected
Blinking white: Active signal
Output relaysOff: No wire
Steady white: Wire connected
Blinking white: Relay triggered
UA-Intercom
Mechanical
Dimensions324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")
WeightDevice: 965 g (2.1 lb)
Bracket: 445 g (1 lb)
Enclosure materialAluminum alloy, UV-stabilized polycarbonate, glass
Mount materialPowder-coated stainless steel
MountingWall mount, adapter to the gooseneck pedestal (Included)
Surface angle mount, flush mount (Optional)
Sunshield kit (Optional)
WeatherproofingIP65
Hardware
Networking interface(1) GbE RJ45 port
ConnectivityBluetooth 4.2
NFC
Power methodPoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range48V DC
Max. power consumption13W
ESD/EMP protectionAir: ±15kV, contact: ±8kV
SensorsProximity sensor
ALS sensor
Camera3264 x 2448, 8 MP
H: 79.4°, V: 97.5°, D: 118.2°
Display177 mm (7") diagonal
Resolution1024 x 600 (16:9)
Display luminanceMax. 1000 nits (typical)
Touch screen technologyCapacitive multi-touch
MicrophoneYes
Speaker(1) 4 ohm, 2W
LEDs(1) LCM low temperature indicator: orange (LCM turned off when it’s below -25° C but the system funtions normally)
(1) LED floodlight
(13) Keypad LED backlight
Button(1) Factory-reset
NFC frequency13.56 MHz
NFC read range< 30 mm
NFC standardsISO 14443A, 14443B, 15693
NFC technologyNFC Tag 1,2,3,4,5
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE DESFire
Ambient operating temperatureDevice: -30 to 60° C (-22 to 140° F)
Display:* -25 to 60° C (-13 to 140° F)
*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66)
Operating environmentOutdoor use
Ambient operating humidity5 to 90% noncondensing
Software informationThe software version of a product can be checked at https://unifi.ui.com
UL 294 levelDestructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirementsCable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 GradeGrade assignment: I
CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision levelUA-Intercom, V01
UACC-Extender-2Wire-PoE-Tx/Rx
Mechanical
Dimensions40 x 105 x 25 mm (1.6 x 4.1 x 1")
WeightPoE in: 77 g (2.7 oz)
PoE out: 79 g (2.8 oz)
Enclosure materialPolycarbonate
Mounting materialPolycarbonate
Hardware
Networking interface(1) 10/100 MbE
(1) Homeplug AV
Power methodPoE++
Max. power consumption3W (Without PoE output)
PoE input(1) PoE++, 50V DC, Max. 1.2A
PoE output(1) PoE+, 48V DC, 0.72A
ESD/EMP protectionAir: ±8kV, contact: ±4kV
LEDWhite
Ambient operating temperature-10 to 40° C (14 to 104° F)
Ambient operating humidity5 to 95% noncondensing
CertificationsCE, FCC, IC
U-PoE++
Specifications
ModelU-PoE++
Dimensions106 x 63 x 34 mm (4.2 x 2.5 x 1.3")
Weight210 g (7.4 oz)
Output voltage48V DC @ 1.25A
LAN activity indicatorNo
Gigabit LAN portYes
Remote reset capabilityNo
Reset buttonNo
Rated voltage100—240V AC @ 50/60Hz
Input current1.3A @ 120V AC
0.75A @ 230V AC
Inrush current<100A peak @ 120V AC
<200A peak @ 230V AC
Efficiency85+%
Output ripple1% max.
Switching frequency65 kHz
Line regulation≤ 1%
Load regulation≤ 3%
2-pair poweringNo
4-pair poweringPins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-)
AC connectorIEC-320 C6
Data In / PoERJ45 shielded socket
Surge protectionDifference and common mode
Clamping protection11V data, 60V power
Max. surge discharge1500A (8/20 μs) power
Peak pulse current36A (10/1000 μs) data
Shunt capacitance<5 pF data
Response time<1 ns
Power methodUniversal AC input, 100—240V AC, 50/60 Hz
Power supplyAC/DC
Supported voltage range100—240V AC
Max. PoE+ wattage per port by PSE60W
Ambient operating temperature0 to 40° C (32 to 104° F)
Storage temperature-30 to 70°C (-22 to 158° F)
Ambient operating humidity10 to 95% noncondensing
CertificationsCE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS