UniFi
UISP
AmpliFi
Intercom
UA-Intercom
279,00 €
Sold Out
Indoor/outdoor intercom terminal for managing residential and commercial building entry requests.

Unlock using an NFC card, UniFi Identity mobile app, PIN code or QR code

Directory and doorbell to request entry

Pairs with multiple UniFi Intercom Viewers for remote access control

Connects to UniFi Access Hub series using PoE

Weatherproof (outdoor exposed -30 to 60° C)

To subscribe to back in stock e‑mails.
Intercom Viewer
139,00 €
Intercom Sunshield
45,00 €
Sold Out
Intercom Flush Mount
45,00 €
Sold Out
Intercom Surface Angle Mount
45,00 €
Installation Guide
Technical Specifications
Mechanical
Dimensions324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1")
WeightDevice: 965 g (2.1 lb)
Bracket: 445 g (1 lb)
Enclosure materialAluminum alloy, UV-stabilized polycarbonate, glass
Mount materialPowder-coated stainless steel
MountingWall mount, adapter to the gooseneck pedestal (Included)
Surface angle mount, flush mount (Optional)
Sunshield kit (Optional)
WeatherproofingIP65
Hardware
Networking interface(1) GbE RJ45 port
ConnectivityBluetooth 4.2
NFC
Power methodPoE
Supported voltage range48V DC
Max. power consumption13W
ESD/EMP protectionAir: ±15kV, contact: ±8kV
SensorsProximity sensor
ALS sensor
Camera3264 x 2448, 8 MP
H: 79.4°, V: 97.5°, D: 118.2°
Display177 mm (7") diagonal
Resolution1024 x 600 (16:9)
Display luminanceMax. 1000 nits (typical)
Touch screen technologyCapacitive multi-touch
MicrophoneYes
Speaker(1) 4 ohm, 2W
LEDs(1) LCM low temperature indicator: orange (LCM turned off when it’s below -25° C but the system funtions normally)
(1) LED floodlight
(13) Keypad LED backlight
Button(1) Factory-reset
NFC frequency13.56 MHz
NFC read range< 30 mm
NFC standardsISO 14443A, 14443B, 15693
NFC technologyNFC Tag 1,2,3,4,5
MIFARE Classic
MIFARE Plus
MIFARE Ultralight
MIFARE DESFire
Ambient operating temperatureDevice: -30 to 60° C (-22 to 140° F)
Display:* -25 to 60° C (-13 to 140° F)
*The display will turn off when the ambient temperature is above/below the display operation temperature, but other functions will remain functional. (Effective after firmware v 1.0.66)
Ambient operating humidity5 to 90% noncondensing
CertificationsCE, FCC, IC
Software
Management application UniFi Access: Version 1.22.17 and later